Blogs & Articles
Square Rubber Horse Trailer Bumpers
> Trailer Bumper, Square Rubber, 96" Long: 4" Height
Rear SQUARE Rubber Horse Trailer Bumper
Trailer Bumper, Square Rubber, 96" Long: 4" Height
Over Sized / Weight Freight Charge
Put me on the Waiting List
Add to Cart
Review this item
Email a friend
Square Trailer Rubber Bumper-8ft / 96" long X 4
" Height / Back
w/ Pre-Drilled Holes
Molded of hard rubber,
square in shape
& hollow in the middle, 96" in length.
(Some customers think this shape of bumper is stronger, plus it has a toe grip on the top surface.) Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96", you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).
Pre-drilled bolt holes: The first bolt hole center is placed 4 inches from each end, then the next bolt hole centers are 11 inches apart. 9 holes total. The holes are drilled for a 9/16" bolt (not supplied). From the left side: bolt holes are centered at 4", 15", 26", 37", 48", 59", 70", 81", 92".
OFC: A $100. extra charge in addition to flat-rate shipping charges for shipping a LARGE, HEAVY OR LONG item by ground.
This bumper costs over $100. to ship by ground.
Trail Pals tip: For accurate measurements, if the old bumper is already removed from the trailer, lay the bumper on a flat surface & measure the flat back for the hole pattern.
Aluminum Butt Hinge, 5" X 5" with 1/2" Diameter Pin, Bolt-on or Weld-on
BUNKHOUSE ALL HUMAN First Aid Medical Kit
Ramp Assist Springs, HINGE MOUNT for 2" OD Shaft- each spring sold separately
Masterlock Hasp orTrigger-Type Coupler Lock w/ 2 Pin Sizes
Two-Way Roof Vent Gasket, LOW PROFILE
Flex Hooks -in three great colors!
Recently Viewed Items