Toggle Switch Cup with one opening
Choose from aluminum, 20 gauge zinc plated steel or sturdy plastic (different clearances)
The traditional aluminum or 20 gauge zinc-plated steel switch cup fit in a one inch deep, 2 1/8" - 2 1/4" diameter hole, protecting the toggle switch from accidental engagement. You will need 1 1/2" of clearance in the wall to install this switch cup with our toggle switch, part # TS12VBLADE. Each outer frame is 3 3/8" diameter. Mount with rivets or three #8 X 3/4" screws, sold on the Fastener page.
The sturdy black plastic switch cup is different, as the cup is 1/8" deeper & the switch position is arranged so the toggle switch would be placed in the slanted TOP inside the cup, positioned vertically. This allows for LESS clearance inside the wall: You will only need 1 1/8: clearance If this switch cup is installed with our toggle switch, part# TS12BLADE. The mounting holes & screws are the same as above. Perfect for both steel & aluminum trailers.