Tie Ring, w/ 4" Bolt Centers: Stainless Steel
These tie rings are made of solid stainless steel, with a slight groove on the top of the loop.
You can replace your Aluminum tie rings with this
Stainless Steel Tie Ring, and they have exactly the same bolt
center hole measurements, 4" centers. They are a lot less
likely to break than the aluminum tie loops when a horse pulls on them. You may choose one with or without the gaskets. Stainless steel has no reaction when mounted on aluminum or steel trailers.
1/2" diameter material, 2 1/8" outer height (because of the groove on the top), 1 3/4" inner height. 4" bolt centers. Both generally use 3/8" carriage bolts, BUT if you remove the gasket on the TRSS4G, you will find the hole is larger & can be installed it with a 1/2" diameter bolt, which may be geared for "other" uses besides a horse trailer tie loop. Breaking capacity is 3,500 lbs.