RUMBER Custom Trailer Bumper 7', or up to 84"
Side View

RUMBER Custom Trailer Bumper 7', or up to 84"

review
0
0
5
Your Price: $55.00
Part Number:TBRC7

Choose Options

Over Sized / Weight Freight Charge help
$16
RUMBER Custom Trailer Bumper 7', or up to 84"

Manufactured by RUMBER Materials, Inc

RMI combines recycled tires and plastics, then molds them into a solid bumper
that will not crush if the trailer is backed into a object, or collapse if the
 horse steps on it.

3 1/4" tall is the only vertical back height offered.The bumper extends out
2 1/4" from where it is mounted, and is slanted on both top & bottom to measure1 1/2" at the outer rounded edge. The top surface has 3 grooves
for a better grip for horse's hooves. This product has a concave back, and must have enough room so that both the top & bottom edges fit flat against the trailer 3 1/4".
The bolt holes are counter-sunk 7/8", for safety. Use 3/8" bolts with a 1' wide washer.
 
Custom Bumpers measuring up to 84" are the 7' price.

Bumper lengths measuring over 84" are the 8' price.

You will not receive the remaining length, but you can order two pieces if
your bumper is "split", an you will just be charged for the total number of inches, either the 7' price or the 8' price.

Each trailer bumper is custom cut to the exact length by the fraction of an inch that you specify, and the bolt hole centers are drilled exactly where you specify.
**Follow your order with a fax or scanned  diagram of the bumper you want,
 showing the exact length by inches & showing exactly where the bolt hole
centers should be placed, starting from the LEFT, facing the back of the trailer.

    Fax to: (888) 456-7982 OR Email to:info@trailpals.com

    **Measure carefully--no returns on custom cut items.
 
OFC: An extra charge in addition to flat-rate shipping charges
  for shipping a Oversize or Overweight OR Very Long item by ground.