Drop-Down Windows serve as a horse trailer "feed-door" and window combined!
MUSTANG SERIES, Choose from 3 sizes with black frames, 30X24, 30X20, 24X20
The 30X24 size is already sold out.
The Mustang Series Drop-Down Feed Door/ Window is a newer heavy-duty slider-style window, with a centered rounded handle for easy handling of the window, and it is hinged at the bottom. The large tinted slider-style safety-glass panels allows more screened ventilation with the window in the upright position. These windows feature an intricate hinge system, and an aluminum frame with bars (called a face cage or face guard) on the inside, that opens & closes separately from the exterior, but can remain up when the window portion is "dropped down", for optimum ventilation and the horse's protection. This product's "face cage" has 5 vertical bars and the bar in the center opens or shuts the cage by sliding it up & down. This window is heavier than previous models, featuring 2 heavy-duty hinges, large locking center handle, a thicker frame, larger slam bolt on the "cage", and larger aluminum bars that are riveted in (replaceable if need be). Allows lots of air & light for the horse from the inside. These windows will fit in the same rough hole openings as the Slim Line Series, in case you want to upgrade.
* Heavy all-aluminum frame, in black
*Lowered center handle latch, locking w/ key
* Automotive rubber seal around the outer window and the frame
* Drop-down protective aluminum cage opens from the outside
*All windows are black frame with tinted "smoke" colored safety glass.
***CLAMP RING: window purchase DOES NOT INCLUDE inner mill finish aluminum trim piece (clamp ring), a $20.00 value. If you are replacing an exact duplicate window, your existing clamp ring should work.The window goes in the hole from the outside. On the back of the window, there is a GROOVE RUNNING ALL THE WAY AROUND THE WINDOW. The clamp ring goes in from the inside, fits against the back of the window & the clamp ring frame rests on the trailer wall, closing all gaps. There are small holes all around the clamp ring, and you use small screws to screw through the clamp ring holes & INTO the groove on the back of the window.This is what holds the window tight to the trailer wall without putting fasteners into the outside frame. When choosing a new clamp ring, we ask you to measure the THE THICKNESS OF THE WALL OF THE TRAILER, not the thickness of the window, or how far it sticks out inside the trailer. THE CHOICES ARE: 1/8" wall (the window is installed into the "skin" of the trailer). OR: 1 1/2" wall: the trailer wall is insulated, or has a smooth, flat finish on the inside. Call us if you have something different & we will try to accommodate you.
**These windows may not match the style of your trailer's existing windows. Please look carefully to be sure the SHAPE of the window is a match.
*The radius of the corners is 3.305 inches. 90 degree radius. All window measurements are the rough hole opening measurement.
If you are measuring the outer window frame, both height & width should measure 1/1/4" larger than the rough hole opening.
. *You will need 14 to 18 #8 or #10 X 3/8" sheet metal screws for installation with a properly-sized clamp ring. We think you should re-use the screws you remove from the original window, if possible, because they are already perfect size for your application. 14 screws for the 24X20 windows, 18 screws for the 30X20 or 30X24 windows
DIY disclaimer: Anytime you are going to cut a hole in your trailer, we recommend you be perfectly sure of what your are doing. If you have not done this before, or you are not sure of how this window installs, please take the trailer to a professional. These windows do not come with DIY instructions, because if you have any questions, don't do it yourself!!
We recommend that all parts and accessories be installed by a professional. If you choose to install them yourself, Trail Pals will not be responsible for any damage caused to yourself or your property.
[ITEMPRICE]