Break-Away Kit with LED Charge Indicator, 12 Volt Battery, Charger, Switch w/ Pin & 44" cable
Can be mounted as FLOOR MOUNT, or as SIDE MOUNT
You will know at all times if your battery is charged, without having to remove it from the case!
Having this break-away kit installed will activate trailer brakes immediately if the trailer separates from the tow vehicle. The built-in battery charger charges battery when it is connected with the tow vehicle. Built-in "Push to Test" LED battery meter will verify the battery charge as fully charged, re-charge, or charging. The floor-mounted box can be mounted on the tongue of the trailer or in the tack area. 1 - 2 axle capacity, uses a 5 Amp hour battery. Diagram printed on top of cover. Cover screws down, so battery cannot fall out when mounted in any configuration.
Mounts with four #14 sheet metal screws, 1 1/4" long, not included.See below.
By quickly pushing a button, you will know at all times if your battery is charged,
without having to remove it from the case!
[ITEMPRICE]