Aluminum Bushing, 1/2 inch ID X 2 1/4" L
Used in conjunction with a 1/2" (outer diameter) Aluminum Pin
This is a bushing that we sell for use with a slant load divider, used in conjunction with our aluminum 7" divider pin.These two products are used together in multiple ways to allow livestock trailer doors, divider & gates to be able to swing & latch securely shut without a higher-tech latch that may break. You will need 3 bushings & one pin to complete each application, with 2 bushings welded to one side & 1 bushing welded to the other side to fit in between the 2. Then the aluminum pin is dropped in when the bushings are lined up. Unpainted aluminum. Matching divider pin is product: TDLPA
* not for weight bearing hinges, such as horse trailer ramps: you should buy a thicker, sturdier bushing
[ITEMPRICE]