Phone: (901) 296-5006
info@trailpals.com
Home
Order
Shipping
Contact

  Windows & Feed Doors

RECTANGLE  Acrylic Window Panels

Example: UVEX rectangular window panel with the aluminum lipped trim applied.

UVEX acrylic rectangular panels are ORDERED LARGER THAN THE WINDOW OPENING & fastened onto the trailer with glue, screws or rivets. The edges are covered with a piece of aluminum lipped trim (sold below), to form a window. Shatter-resistant, the panels are 1/8" thick. The color has a "smoked glass" (grey/brown) tint that absorbs 65-70% of all UV rays. It can be bent around a gentle curve.

 *Shown here with the frame trim on, but sold without the frame. Aluminum lipped trim for the frame is sold below.

UVEX Window, 8" X 15", Rectangle

Product Name:
 
SKU:
Price (US$):

UVEX Window, 8" X 18", Rectangle

Product Name:
 
SKU:
Price (US$):

  UVEX Window, 9" X 20", Rectangle, Rectangle

Product Name:
 
SKU:
Price (US$):

Aluminum Lipped Trim

This decorative aluminum trim is traditionally used to trim around Plexiglas acrylic windows.  LOOKS BEST WHEN CORNERS ARE MITERED. Also used to cover the seams on trailers where an upper curve is involved, such as between the roof & sides.

It can be fastened with glue & rivets.  It is sold in 12 foot sections, but is cut in half before shipping. You will receive two 6 ft. pieces. Choose 1" or 1 1/4" wide.

 Aluminum Lipped Trim 1" OR 1 1/4" x 12'

Product Name:
 
SKU:
Price (US$):

Product Name:
 
SKU:
Price (US$):

OVAL  Acrylic Window Panels

 Example: UVEX acrylic oval window panel installed with the rubber window gasket.

 

UVEX acrylic oval panels are  shatter-resistant & the panels are 1/8" thick. The color has a "smoked glass" tint that absorbs 65-70% of all UV rays. It can be bent around a gentle curve.

OVAL UVEX panels are usually installed with a continuous rubber window gasket (as shown), sold below by the foot.

*8" X 18" window: (approx. 52")--order 5 ft. of gasket for one window, 9'  for two windows.

*9" X 20" window: (approx. 54")-- order 5 ft. of gasket for one window, 10ft. for two windows.

UVEX Acrylic Window, 8" X 18", Oval

Product Name:
 
SKU:
Price (US$):

UVEX Acrylic  Window, 9" X 20", Oval

Product Name:
 
SKU:
Price (US$):

Rubber Window Gasket - sold by the foot

Also known as: One-Piece Self-Sealing Weatherstrip

This continuous rubber seal & gasket is made to install an OVAL shaped 1/8" thick Plexiglas window into a 16-gauge steel trailer wall. Please order a little longer length than you think you need, because they are hard to measure & it may shrink after being stretched during installation.

*This product does not come with printed instructions for installation. As you look at the side view of the gasket, visualize the bottom channel installed on the trailer body & the top gap is where the window edge is inserted, with the loose "flap" to the outside. Once the window is in place, the small "flap" is folded into the gap under the window to lock the window in place. The finished view from the outside is a  smooth rubber seal with a small line all the way around where the flap was folded in.

Rubber gasket locking tool: The installation tool used to fold the flap in place comes from the automotive glass industry and has a small curved or hooked end on it. Stanley 4-tool set sold below.

Rubber Window Gasket, for 1/8" x 16 Gauge---sold by the foot

Product Name:
 
SKU:
Price (per foot):

Pick-Hook Tool Set  (for installing rubber window gasket)

Stanley Pick-Hook 4-Tool Set, Stainless Steel

This 4-tool set contains the picks & hooks of choice used to fold the rubber flap in place for rubber gasket installation on windows. Each tool in the set is 6 inches long.

PICK-HOOK Tools, Set of 4

Product Name:
 
SKU:
Price (US$):

Universal Trailer "Slider" Windows

Also known as 90 degree radius windows. .These windows come standard with tempered safety glass, black aluminum frames and screens.  They have an inside latch for locking and simple pull handles on the outside.  These widows are UNIVERSAL-- they mount on both sides of the trailer. There are "weep holes" located on the top & bottom of each window, and you should remove the bottom weep hole plugs after installing the window. We have 7 popular sizes to fit your applications. Mount with screws or rivets through the frame, (not included) or order clamp rings based on the thickness of the wall.

Clamp rings for these windows are sold below.

 

Slider Window 12" Tall x 18" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 12" Tall x 24" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 12" Tall x 36" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 12" Tall x 42" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 12" Tall x 48" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 15" Tall x 24" Wide

Product Name:
 
SKU:
Price (US$):

Slider Window 18" Tall x 42" Wide

Product Name:
 
SKU:
Price (US$):

Clamp Rings for the Slider Windows sold above

Ho

Most "slider" trailer windows are attached by rivets or screws. Clamp rings are used for a more professional-looking installation, but are not absolutely necessary. They are offered in two wall thicknesses: 3/4" & 1 1/4", for each size window.

When ordering a clamp ring for a slider window, the numbers on the SKU are the height of the window X the length of the window X the thickness of the wall.

The clamp ring come with holes for screws or rivets. The inside of the window has a matching groove all the way around where the screws attach through the clamp ring.

Slider Window Clamp Ring 12x18, for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x18, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x24, for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x24, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x36, for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x36, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x42,  for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x42,  for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x48, for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 12x48, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 15x24, for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 15x24, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 18x42,  for 1 1/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Window Clamp Ring 18x42, for 3/4" wall thickness

Product Name:
 
SKU:
Price (US$):

Slider Windows w/ Livestock Bars...also known as "Butt Windows"

Slider Window with Livestock Bars

These Livestock Windows are the most common size available for horse trailers. Other sizes are available by special order from our USA window manufacturer. They feature "smoke" tinted safety glass, a 1/2 screen, and strong bars welded to the window that keep the livestock from getting injured. A clamp ring (for a professional-looking installation) is included with the purchase, and the clamp ring choices are for either a 1/8" thick wall or a 1 1/2" thick wall.

*After the purchase, please contact us with your clamp ring choice.

Contact us for any OTHER size of slider window with livestock bars built in. The lead time for shipping a custom-size order is 2 weeks. Ships from the Mid-West via GROUND or LTL.

Slider Window, 24"wide X 20" tall w/ Livestock Bars & Clamp Ring

Product Name:
 
SKU:
Price (US$):

Drop-Down Feed Doors / Windows

 

The windows installed on this Circle J trailer are the basic model of window that we are offering for sale, except the windows are now solid black aluminum across the top where the latch is. Pictured are the 24"W X 20"T size in 3 different positions, shown from the interior & exterior.

++++++++++++++++++++++++++++++++++++

 

 ABOVE: Inside view when fastened with the clamp ring, which is included. This trailer wall is 1/8" thick.

*************************************************************

ABOVE: This is the actual front view of this window model.

 

Drop-Down Windows serve as "feed-door" and window combined! Top-latch handle opens from outside, is hinged at the bottom. Slider-style lower safety-glass panel allows screened ventilation with the window in the upright-closed position. These windows feature a  aluminum frame with bars (called a cage or face guard) on the inside, that opens & closes separately, but can remain up when the window  portion is "dropped down", for optimum ventilation and the horse's protection.

* Heavy all-aluminum frame, in black
* Flush mount latch, locking w/ key
* Automotive rubber seal around the outer window and the frame
* Drop-down protective aluminum cage

*All windows are black trim with tinted "smoke" colored safety glass.

*window purchase includes inner aluminum trim piece (clamp ring).

**These windows may not match the style of your trailer's existing windows, due to the fact that some window manufacturers have recently gone out of business! Please look carefully to be sure the SHAPE of the window is a match.

*The radius of the corners is 3.305 inches. 90 degree radius.

Drop Down Feed Window, 24" Wide x 20" Tall

Product Name:
 
SKU:
Price (US$):

Drop Down Feed Window, 30" Wide x 20" Tall

Product Name:
 
SKU:
Price (US$):

Drop Down Feed Window, 30" Wide x 24" Tall

Product Name:
 
SKU:
Price (US$):

   

 Replacement Slam Latch for Drop-Down Window Cage

View of both sides for reference--SOLD in SINGLES..

Drop-Down Window Cage Slam Latch

This is the replacement latch (or catch) for the "aluminum face cage", barred section of a drop-down feed door. It is intended for side-mount operation. There is one on each side of the cage to fasten it shut & they are connected in the middle with a lanyard to a small hook on the spring end of the slam latch. The actual plastic bolt is  4 1/4" long & measures 3/8" on all four sides. It is slightly beveled on the end that fastens inside the window frame.

*This product is made by one window manufacturer for their window models, and the fit may not be universal.

Lanyards to connect the plastic slam latches are sold below.

Drop-Down Window Cage Latch

Product Name:
 
SKU:
Price (US$):

Lanyards

Made of steel multi-strand aircraft cable, fastened with ferrule clamps that make loops at both ends.
Lanyard, 12"Aircraft Cable w/ closed ends

Product Name:
 
SKU:
Price (US$):
Lanyard, 18"Aircraft Cable w/ closed ends

Product Name:
 
SKU:
Price (US$):

 

Lift-Up Door Holder

  Lift-Up Door Holder

Super hard to find! This super-strong little well-made gadget has a powerful spring and is used to hold doors & windows open in a broad range of applications. The catch side opens to over 45 degrees, and can be set to hold at a lesser angle. The base is stainless steel, and the steel/zinc catch folds all the way over it when it is closed, or at rest.

The latch (or catch) is 2 1/2" tall X 1/2" wide on the outside & the inside measurement is 1 7/8", with the prong on the top having 1/4" of holding area. The base is 2 1/4" X 1/2" wide & the screw centers on the base are 3/4" apart. Mount with a #8 or #10 screw.  

Lift-Up Door Holder

Product Name:
 
SKU:
Price (US$):

 

 We recommend that all parts and accessories be installed by a professional. If you choose to install them yourself, Trail Pals will not be responsible for any damage caused to yourself or your property.

 
HOME
  |  SHIPPING POLICY  |  RETURN POLICYFAX ORDER FORM  |  CONTACT

 
Assisted by Quail Oaks Financial, LLC Webdesigns
Copyright 2005-2013 Trail Pals & Horse Trailer Accessory Store All rights reserved.