|
|
 |
Windows &
Feed Doors
|
|
|
UVEX Window
Panels |
Example: Uvex rectangular
window panel with the aluminum trim applied. |
Uvex rectangular
panels are
fastened onto the trailer with screws
or rivets & the edges
are covered with a piece of aluminum lipped trim (sold
below), to form a window. Shatter-resistant
and many times stronger than glass, and
with a UV rating built-in. The color has a
"smoked glass" tint. 1/8" thick.
*Shown here with the frame
trim on, but sold without the frame.
|
|
UVEX Window, 8" X 15", Rectangle |
|
|
|
UVEX Window, 8" X 18", Rectangle |
|
|
|
UVEX Window, 9" X 20", Rectangle |
|
|
|
|
Aluminum
Lipped Trim |
 |
This decorative aluminum trim is
traditionally used to cover the seams on
trailers where an upper curve is involved, such as
between the roof & sides. Also used to
trim around UVEX windows.
It can be fastened
with glue & rivets. It is sold in 12
foot sections, but is cut in half before
shipping. You will receive two 6 ft. pieces.
choose 1" or 1 1/4" wide. |
|
Aluminum Lipped Trim 1" & 1 1/4" x
12' |
|
|
|
|
|
|
UVEX
windows |
Example: Uvex oval
window panel installed with the rubber
window gasket.
|
These UVEX window panels are
shatter-resistant & stronger than glass,
with a UV factor built in. The color is a
"smoked glass" tint. 1/8" thick.
OVAL Uvex panels are usually
installed with a continuous rubber window gasket (as
shown), sold below by the foot.
*8"
X 18" window:
(approx. 52")--order 5
ft. of gasket per window
*9"
X 20" window:
(approx. 54")-- order 5
ft. of gasket per window |
|
UVEX Window, 8" X 18", Oval |
|
|
|
UVEX Window, 9" X 20", Oval |
|
|
|
|
Rubber
Window Gasket - sold by the foot |
 |
This continuous rubber seal & gasket is
made to install an
OVAL shaped 1/8" thick UVEX window
into a 16-gauge
steel trailer wall. Please order a little
longer length than you think you need, because they
are hard to measure & it may shrink after
being stretched during installation.
*This
product does not come with instructions for
installation. |
|
Rubber Window Gasket, for 1/8" x 16 Gauge---sold
by the foot |
|
|
|
|
Slider
Windows |
 |
Also known as 90 degree radius windows.
.These windows come standard with
tempered safety glass, black frames and
inside screens. They have an inside
latch and outside pull handles, and are
designed to fit either the left or right
hand side. We have 7 popular
sizes to fit your applications. Mount
with screws or rivets (not included). |
|
Slider Window 12" Tall x 18" Wide |
|
|
|
|
Slider Window 12" Tall x 24" Wide |
|
|
|
|
|
Slider Window 12" Tall x 36" Wide |
|
|
|
|
|
Slider Window 12" Tall x 42" Wide |
|
|
|
|
Slider Window 12" Tall x 48" Wide |
|
|
|
Slider Window 15" Tall x 24" Wide |
|
|
|
Slider Window 18" Tall x 42" Wide |
|
|
|
|
Drop-Down
Feed Doors/Windows |
 |
Drop-Down Windows serve as
"feed-door" and window combined! Top-latch
handle opens from outside, hinged at bottom. Slider-style lower glass panel allows
screened ventilation with the window in the
upright-closed position. These windows
feature an inner aluminum frame with
aluminum bars (called a cage or
face guard) on
the inside, that opens & close
separately, but can remain up when the
window portion is "dropped down", for
optimum ventilation and the horse's
protection. - Heavy all aluminum frame
- Flush mount latch
- Automotive rubber seal around window area
- Drop-down protective aluminum cage
- All windows are black trim with smoked
glass **These
windows may not match the style of
your trailer's existing windows, due to
the fact that some window manufacturers have
recently gone out of business! (The
measurements probably are the same.) |
|
Drop Down Feed Window, 20" Tall x 24" Wide |
|
|
|
Drop Down Feed Window, 20" Tall x 30" Wide |
|
|
|
|
|
|
|
|
