Trailer Steps

Heavy Duty Folding Step - Hand / Hold

Heavy Duty Folding Step-stainless steel.

Polished appearance. For exterior or interior installation on trailers. Must be bolted onto wall studs. Commonly used to help gain access to the upper interior deck of gooseneck trailers or on the exterior to help access rooftop hayracks. 4" wide with hole centers spaced 3.89" apart. Use 5/16" bolts.

 Heavy Duty Folding Step-stainless steel.

Product Name:
 
SKU:
Price (US$):

Heavy Duty Folding Step - Hand / Hold

Heavy Duty Folding Step-steel, zinc plated.

Polished appearance. For exterior or interior installation on trailers. Must be bolted onto wall studs. Commonly used to help gain access to the upper interior deck of gooseneck trailers or on the exterior to help access rooftop hayracks. 4" wide with hole centers spaced 3.89" apart. Use 5/16" bolts.

 Heavy Duty Folding Step-steel, zinc plated.

Product Name:
 
SKU:
Price (US$):

Single Pull-Out Step with 8" Drop

Important notes:

*If this is a NEW ADDITION to your trailer, installation of this step may require welding of steel or aluminum  studs to the trailer undercarriage. 

**This step will not work where a running board is installed.

Single Pull-Out Step with an 8-inch drop

 A new simpler design with fewer mechanical parts, this single RV-type step installs for easier access for your tack room. Pulls open & pushes closed in one fluid motion & it locks in place when closed. Heavy-duty black powder-coated steel construction, it can be bolted to the floor or welded to the frame of a trailer. Weighs 12.5 lbs. Not rated for weight.

step: 20" wide X 8" deep

frame: 21" wide

side brackets: 6" X 6 3/4"

drop" 8"

+$5. FOB: charge in addition to regular flat-rate shipping, for a large or heavy box.

*If this item is returned, the customer pays for the return shipping & there will also be a $4.00 re-stocking fee deducted from your refund--UNLESS IT IS OUR MISTAKE.

 Single Pull-Out Step with 8" drop

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

KEEPER Safety Step

This product has the best grip we've ever seen for a skid-resistant step! Made of a heavy-duty sunlight & ozone resistant flexible rubber, it has a 1/8" thick base with 1/8" raised areas that grip your boots. Apply the 4" X 17.5" strips to any clean surface by removing the peel & stick backing. The specially formulated adhesive makes the strip stay put. Great on fenders & running boards of trailers where you step up to look at the animals or anywhere you need excellent traction.

*1/8" tall X 4"W  X 17.5"L strips
 

 


 

 

 KEEPER Safety Step

Product Name:
 
SKU:
Price/ea. (US$):

Trailer/RV step, 14"

These portable heavy-duty molded plastic steps are designed to help you step safely into a trailer tack room, living quarters or RV. Sturdy with a wide base. Can also be used for mounting a small horse. 14" tall, with two 7" steps. 

*Available in ash grey color only.

Lifetime warranty by High Country Plastics

21" L x 18 3/4" W x 14" H

 FOB: charge in addition to regular flat-rate shipping, for a large or heavy box.

Trailer/RV steps, 14" / two steps

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

 

We recommend that all accessories and parts be installed by a professional. If you choose to install them yourself, Trail Pals will not be responsible for any damage caused to yourself or your property.

 

 
HOME
  |  SHIPPING POLICY  |  RETURN POLICYFAX ORDER FORM  |  CONTACT

 
Assisted by Quail Oaks Financial, LLC Webdesigns
Copyright © 2005-2009 Trail Pals & Horse Trailer Accessory Store All rights reserved.