Trail Pals
tip:
These pads are
constructed of a soft, but strong vinyl, sewn
over 1 1/2" foam onto a rigid cardboard
backing. This creates a 1" flat border area. We have had them in our trailer
(stored outdoors in a rainy environment) for
three years with no problem.
 Horse
Trailer Pad fastener option:
Black Nylon Retainer Clip
(code: HTPRC)
These are also known as "push pins". They
work with 1" double-wall aluminum trailers &
dividers, although they are designed for
just a one-time use. The nylon
threads are flexible, and they catch the
trailer surface & hold the pad tight. Using
a drill with a 3/16" bit, drill a hole
through the flat pad border area & trailer wall. Push the pin
in with your fingers. You can use less clips
than with a screw application, drill less
holes, and it looks neater. Choose the 1"
black retainer clips for the pads we sell.
*These are also the common applicator for
homemade or commercial "upgrade" trailer
pads
that have no border, and here they are applied
directly through the foam area. For trailer pads
made with no border,
choose the 1 1/2" length black retainer clip.
HOW MANY DO YOU NEED?
-
4 Clips for each 12" pad
- 6 clips for each 24" pad
- 8 clips for each 40" pad
- 10 clips for each 60" pad
|
Horse
Trailer Pads
The standard
color is black.
Pad
your slant-load and straight-load trailer dividers and
walls.
Fasten with appropriate screws and
washers along the 1" border, where there is no padding.
Single
rectangular
trailer pads in any combination are priced as follows:
|
HTP60B |
9"W X
60"L |
$
22.00 each |
|
HTP40B |
9"W X
40"L |
$15.00 each |
|
HTP24B |
9"W X
24"L |
$
10.00 each |
|
HTP15B |
9"W X
12"L |
$
6.00 each |
60" pads
are for side walls with no access doors
or slant-load dividers.
40" pads
are for trailer walls with escape doors or
slant-load dividers.
24" pads
are for breast or butt pads.
12" pads
are for escape doors.
We sell #8
1/2" or 3/4" long steel/zinc
screws & washers to mount
these pads to any wood, steel or
aluminum trailer surface.
HOW
MANY Do You Need? Suggestion:
-
6
screws & washers for a 12" pad
- 8
screws & washers for a 24" pad
- 10
screws & washers for a 40" pad
- 14
screws and washers for a 60" pad
For steel or wood surfaces, order
#8 - 1/2" or 3/4"
wood screws,
self- drilling screws or washers on the
Fastener page.
Wood Screw
Sheet Metal Screw #8
Washer
For installing pads on aluminum
surfaces, order coated TEK screws from
the Fastener page.
You won't need washers.
|
|
Single Trailer Pad, 9" x 12" Black |
|
|
|
Single Trailer Pad, 9" x 24" Black |
|
|
|
Single Trailer Pad, 9" x 40" Black |
|
|
|
Single Trailer Pad, 9" x 60" Black |
|
|
|
Trailer Pad Retainer Clip, 1" |
|
|
|
Trailer Pad Retainer Clip, 1 1/2" |
|
|
|
