|
|
 |
Trailer Locks
|
|
|
LOCK YOUR
TRAILERS!
Trailer
and trailer ball mount theft is an everyday event at homes, barns, shows,
and at the trailheads. It makes good
sense to protect your expensive investment
with a rugged, economical trailer lock system. It's
worth it to take the time to try to deter thieves and find
your trailer and ball mount exactly where you left them!
We
are expanding our trailer lock selection, and
we'll be able to sell you a lock for almost every
trailer you have. We can key most trailer locks or
padlock sets alike at no extra cost. Multiple orders of
locks will be keyed alike, unless specified otherwise.
Please
inquire about fleet sales and multiple discounts.
QUICK SEARCH:
|
TRAILER
BULLET Gooseneck Trailer Lock |
|
.jpg)
|
NEW!
Trailer
Bullet Gooseneck Trailer Lock
This is the
best new lock product for securing
Gooseneck Trailers! It is different
because it installs on the gooseneck jack
crank handle. It
takes just a few minutes to attach
the center section portion of the lock,
and it
stays on the trailer jack permanently. When you slide
the barrel over the center section, and
add a padlock, your jack cannot not be
operated,
preventing your trailer from being moved.
The Trailer Bullet GN Lock
contains:
1 center section, hardware
for permanent installation, the two locking barrel pieces,
and instructions for installation. The
padlock is not included in the purchase
price. You will need a padlock to lock this
device.
Shown with RTP70 round
padlock (sold separately below).
The TB Center Section
is offered in case you have more than one GN
trailer. Install the center section only on
the second trailer, and simply switch the locking
mechanism to the
one you are traveling with. We only have two
of these inner mechanisms left, and when
they are sold we will only be selling the
complete sets. |
|
TRAILER
BULLET Gooseneck Trailer Lock |
|
|
|
TRAILER BULLET Center Section only |
|
|
|
|
|
Bulldog
Trailer Lock |
 |
Heavy cast aluminum lock fits all
Hammer blow 1 7/8", 2" or 2 5/16"
Bulldog-style trailer couplers, and similar styles with
slide collars. Lower portion has a ball that inserts
into the coupler. For
rugged use, and will not rust or wear out.
Shown with
RTP70 round padlock (sold separately below).
|
|
Bulldog
Trailer Lock |
|
|
|
|
Universal
Trailer Lock |
 |
Heavy-duty cast aluminum lock for larger trigger-type couplers. Fits 30
types of couplers including 8,000 lb. and 10,000 lb.
Atwood couplers. Lower portion has a ball that inserts
into the coupler.
Shown with RTP70 padlock (sold
separately below). |
|
Universal
Trailer Lock |
|
|
|
|
Gooseneck
Trailer Coupler Lock |
 |
Heavy-duty cast aluminum lock fits the on the bottom of most
gooseneck couplers, including Stallion, T.E.M.,
Superior, and Hammer blow. Has a 3/4" pin for a
secure fit.
Shown with GTSL (stem bolt lock) and RTP70
(round padlock), each sold separately below. |
|
Gooseneck
Trailer Coupler Lock |
|
|
|
|
Gooseneck
Trailer Stem Bolt Lock |
 |
Prevents theft by
removal of the
adjustable stem bolts on your gooseneck coupler. Even
when the bottom is locked, thieves can steal your trailer
by removing the stem lock bolts, dropping the
gooseneck attachment and inserting another
coupler or king pin. You will
need a padlock, sold separately below. |
|
Gooseneck
Trailer Stem Bolt Lock |
|
|
|
|
THE
COLLAR Coupler Lock |
 |
The Collar is
a anti-theft device for sliding-collar type
trailer hitches. It provides 24 hour
protection against trailer theft when the
trailer is attached to or detached from the towing
vehicle. It never gets lost, since it is always
kept on the trailer. A quality product, cast out
of stainless steel, it weighs nearly 1 1/2 lbs.
The curved design resists physical damage , such
as hammering or sawing. The hole where the hinge
pin is inserted are welded shut and allow the
hinge pin to "float" in order to to
resist drilling. The Collar will work with an
assortment of different padlocks, allowing the
owner to key locks alike. Sold with a 70 MM
stainless steel round padlock below for $10.00
more. Multiples can be keyed alike. Designed to fit all BULLDOG bumper-pull
couplers, and many Kodiak & Butler
couplers.
THE COLLAR Coupler Lock:
choose one with or without a 70 mm round padlock
|
|
THE
COLLAR |
|
|
|
THE
COLLAR & Coupler Lock |
|
|
|
|
Maximum Security
Coupler Lock |
|
 |
Fits all three common
coupler and ball sizes-1
7/8",
2", & 2 5/8".
Almost impossible to remove by thieves. The bottom piece
fits into the place where the ball goes, then the upper
bars adjust through the side holes to fit tightly onto
the top of the coupler. When it is on tight, just lock
with the key provided, and it stays put. Two locking
mechanisms are inside, with no additional padlock needed.
|
|
Maximum Security
Coupler Lock
|
|
|
|
|
UMAX 50
Coupler Lock |
 |
It fits 1 7/8", 2" and 2
5/16" Couplers. It has a hardened 5/8"
steel shackle. It has a dual ratchet
locking systems. features rugged tubular
keys with key hole covers. It has a
corrosion resistant finish. |
|
Product Name Here |
|
|
|
|
UMAX 100
Coupler Lock |
 |
It fits 1 7/8", 2" and 2
5/16" Couplers. It has a hardened 5/8"
steel shackle. It has a dual-ratchet
locking systems. it features rugged tubular
keys with key hole covers. The body is
covered with a
ballistic-grade nylon housing to prevent
corrosion. |
|
Product Name Here |
|
|
|
|
EZ Wheel Locks |
 |
This lock clamps around the
tire & onto
one wheel of your trailer or truck, visibly deterring
thieves by preventing the vehicle from moving. • Easy to use.
Install and remove in just seconds.
• Lock is recessed into handle for greater security.
• Lock cannot be removed from tire without key.
• Heavy-duty plastic covers to protect rims.
• Fits most 15” 205, 215, F78, H78, wheels.
• Will fit 13”, 14” and 15” tires
• Includes 4 cone-style locking lug nuts designed to be mounted
(1 each) on 4 trailer or truck wheels.
|
|
EZ Wheel Lock |
|
|
|
EZ Wheel Lock
XL--fits 16" tires |
|
|
|
|
5/8"
Receiver Lock with curved end - 3 1/2" Long Straight
Span |
|
 |
Keep your ball mount from
being stolen! Takes the place of the hitch
pin and keeper clip that usually fastens the ball
mount into the receiver. Comes with a lock installed on the end,
covered by a water-tight cap to prevent corrosion. 2 keys included.
this curved style
fits a longer size 5/8" receiver like Magnum
Keyed alike sets
available below. |
|
5/8"
Receiver Lock with curved end |
|
|
|
|
Convertible
5/8" to 1/2" Receiver Lock |
 |
Keep your ball mount from
being stolen! Takes the place of the hitch
pin and keeper clip that usually fastens the ball
mount into the receiver. Comes with a lock installed on the end,
covered by a water-tight cap to prevent corrosion.
Has a special 1/2" shaft to slip over the 5/8" shaft. 2 keys included.
Convertible
style fits either a 1/2" or 5/8" receiver.
Similar pairs of
keyed alike sets are available below at a discount. |
|
Convertible
5/8" to 1/2" Receiver Lock |
|
|
|
|
5/8"
Receiver Lock |
|
|
Keep your ball mount from
being stolen! Takes the place of the hitch
pin and keeper clip that usually fastens the ball
mount into the receiver. Comes with a lock installed on the end,
covered by a water-tight cap to prevent corrosion. 2 keys included.
*Straight style
fits standard-size 5/8" receiver.
Keyed alike sets
available below. |
|
5/8"
Receiver Lock |
|
|
|
|
Receiver
& Coupler
Lock Sets, KEYED-ALIKE |
|
|
Choose any receiver and coupler
lock featured jn the two boxes directly above and we will have them keyed alike
for you, and you will be charged only $27.95 for each
set.
*Please
measure both your coupler & receiver areas
carefully.
*We can key
multiple sets alike.
Please call for fleet sales! |
|
RECEIVER & COUPLER
LOCK
SETS, Keyed Alike |
|
|
|
RECEIVER & COUPLER
LOCK
SETS, Keyed Alike |
|
|
|
RECEIVER & COUPLER
LOCK
SETS, Keyed Alike |
|
|
|
|
|
|
Trigger-Type Coupler
Lock w 3/4" Span |
|
 |
This device locks your
trigger-type coupler while it is attached to your truck,
in place of a coupler safety pin. Prevents removal of
the trailer from the ball mount. Remember to lock your
ball mount to your trailer with a locking hitch pin
also!
|
|
Trigger-Type Coupler
Lock w 3/4" Span |
|
|
|
|
70mm
(2 3/4") Large Round Trailer Padlock |
 |
A very rugged stainless steel
padlock. Makes it very difficult
for bolt cutters or saws to get a grip when it's
fastened to your trailer lock. Weighs 1/2 lb. Comes with 2
keys.
*suggested retail price in stores is
$ 14.95 *See
discount below for two or three padlocks,
keyed alike. |
|
70mm, 2 3/4" Large Round Trailer Padlock |
|
|
|
|
SETS
OF TWO or THREE 70mm round padlocks |
|
|
70 mm, 2 3/4" Large Round Trailer
Padlocks, keyed alike
A very rugged
stainless steel
padlock. Makes it very difficult for bolt cutters or
saws to get a grip when it's fastened to your trailer
lock. Weighs 1/2 lb. each. Comes with 2 keys each.
*This discount is good for any
multiple of TWO or THREE
padlocks, keyed alike. |
|
SET OF TWO 70mm round padlocks, keyed alike |
|
|
|
SET OF THREE 70mm round padlocks, keyed
alike |
|
|
|
|
Extra-Security Padlock w/Key S. Steel |
 |
This lock is solid stainless
steel. It is rustproof and corrosion
resistant. It has a double locking
mechanism that resists picking. It
also contains a brass pin cylinder.
Multiples will be keyed
alike. |
|
Extra-Security Padlock w/Key S. Steel |
|
|
|
|
Extra-Security Combination Padlock,
BRASS |
 |
This brass padlock is unique
because it has a four number combination
that you set yourself.
It features a hardened steel shackle. This makes it impossible to pick, and no
key to lose. We
highly recommend this lock.
|
|
Extra-Security Combination Padlock, BRASS |
|
|
|
|
Super Heavy Duty Steel Padlock |
 |
This lock has a 6-pin brass
cylinder and a solid steel body. It
has a
special double-locking mechanism.
It is re-keyable and has ball bearings.
3/8" shackle is almost impossible to cut
with a bolt cutter. Multiples will be keyed
alike. |
|
Super Heavy Duty Steel Padlock |
|
|
|
|
Trailer
Cam Bar Lock w/ hidden shackle |
 |
This is an amazing lock for your
cam doors. It features heavy-duty
aircraft aluminum that will not rust. It's
a convenient push-button lock with a
hardened plated steel pin. The
perimeter gasket eliminates scratching and
vibration and noise. It covers the
keeper hole used with regular padlocks and
it covers the bolt head at the top and
bottom for added security. Just pull
the ring for easy pin removal. The
ring is designed to break loose if forced.
|
|
Trailer Cam Bar Lock |
|
|
|
|
NEW! XL
Cam Bar Lock w/ hidden shackle |
rear view of lock |
This XL Cam Bar Lock is designed
to fit the bigger 13/16" cam bar
hasps. This lock features solid
steel construction, is re-keyable and uses
an American keyway which makes getting more
keys easy. This is a great value in
a high-security cam bar lock.
Multiples will be keyed
alike. |
|
Extra Large Cam Bar Lock w/ Hidden Shackle |
|
|
|
|
|
