Phone: (901) 296-5006
info@trailpals.com
Home
Order
Shipping
Contact

 . Trailer Bumpers

RUMBER Custom Trailer Bumper

Manufactured by RUMBER Materials, Inc.  RMI combines recycled tires and plastics, then molds them into a solid bumper that will not crush if the trailer is backed into a object, or collapse if the horse steps on it.

3 1/4" tall is the only vertical back height offered. The bumper extends out 2 1/4" from where it is mounted, and is slanted on both top & bottom to measure 1 1/2" at the outer rounded edge. The top surface has 3 grooves, for a better grip for horse's hooves. This product has a concave back, and must have enough room so that both the top & bottom edges fit flat against the trailer. The flat concave back area measures 1 1/2" tall. .

The bolt holes are counter-sunk 7/8", for safety. Use 3/8" bolts with a 1' wide washer.

Each trailer bumper is custom cut to the exact length by the fraction of an inch that you specify, and the bolt hole centers are drilled exactly where you specify.

 
Custom Bumpers measuring up to 84" are the 7' price.
Bumper lengths measuring over 84" are the 8' price.

 

You will not receive the remaining length, but you can order two pieces if your bumper is "split", an you will just be charged for the total number of inches.

 

 

**Follow your order with a fax or scanned  diagram of the bumper you want, showing the exact length by inches & showing exactly where the bolt hole centers should be placed, starting from the LEFT, facing the back of the trailer.

Fax to: (888) 456-7982 OR Email to: info@trailpals.com

**Measure carefully--no returns on custom cut items.

 
FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.  
RUMBER Custom Trailer Bumper 7', or up to 84"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

RUMBER Custom Trailer Bumper 8' or up to 96"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper-7ft / 84" long, w/ pre-drilled holes

Trail Pals tip:

For accurate measurements, lay the bumper on a flat surface & measure the flat back for the hole pattern.

Trailer Safety Bumpers: 7' long, in choice of 3 heights

Molded of hard rubber,  hollow in the middle,  84" in length. Choose from with 3 different heights. Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 84", you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

Pre-drilled bolt holes: The first bolt hole center is placed 3 inches from each end, then the next bolt hole centers are 12 inches apart. The remaining 3 holes in the middle are placed 18" apart. 6 holes total. The holes are drilled for a 3/4" bolt (not supplied).

From the left side: bolt holes are centered at 3", 15", 33", 51", 69", 81"

FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.

Trailer Safety Bumper 2" x 7' 

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper 3" x 7'

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper 4" x 7'

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper-8ft / 96" long, w/ pre-drilled holes

Trailer Safety Bumpers: 8' long in choice of 3 heights

Molded of hard rubber,  hollow in the middle, 96' in length. Choose from with 3 different heights-2", 3" & 4". Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96", you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

Pre-drilled bolt holes: The first hole center is placed 3 inches from each end, then the remaining hole centers are 18 inches apart. 8 holes total. The recessed holes are drilled for a 3/4" bolt (not supplied).

From the left side: bolt holes are centered at: 3", 21", 39", 57", 75", 93"

FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.

Rubber Trailer Safety Bumper 2" x 8', Choice "A"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper 3" x 8', Choice "A"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper 4" x 8', Choice "A"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper-8ft / 96" long, w/ pre-drilled holes (Choice B)

Trailer Safety Bumper: 8' long, with 2" height

Molded of hard rubber,  hollow in the middle, 96' in length & 2" in height. Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96", you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

Additional Support Bar: With this "B" choice of rubber bumper (different manufacturer), a pre-drilled steel support bar is available to install inside the hollow part of the bumper to add more strength.

Pre-drilled bolt holes: The first hole center is placed 2" inches from each end, then the remaining hole centers are 11 1/2" inches apart. The recessed holes are drilled for a 3/8" bolt (not supplied).

From the left side: bolt holes are centered at: 2", 13 1/2", 25", 36 1/2", 48", 59 1/2", 71", 82 1/2", 94"

FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.

Rubber Trailer Safety Bumper 2" x 8', Choice "B"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Support Bar for Rubber Trailer Safety Bumper 2" x 8', Choice "B"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper-8ft / 96" long, w/ pre-drilled holes (Choice B)

Trailer Safety Bumper: 8' long, with 3" or 4" height

Molded of hard rubber, hollow in the middle, 96' in length & 3" or 4" in height. Height measurement is the flat back where it is fastened to the trailer. Comes with pre-cut recessed holes for bolt-on installation. If the length of your bumper is shorter than 96", you may still order this bumper, but please measure the bolt-hole locations carefully! These bumpers are hollow, and can be cut with a saw. They can also be drilled with additional bolt holes (do it yourself).

Additional Support Bar: With this "B" choice of rubber bumper (different manufacturer), a pre-drilled steel support bar is available to bolt inside the hollow part of the bumper (against the back wall) to add more strength.

Pre-drilled bolt holes for both the 3" tall & 4" tall bumper, choice "B": The first hole center is placed 4 inches from each end, then the remaining hole centers are 11 inches apart. 9 holes total.

3" Tall bumper--The holes are drilled for a 9/16" bolt, not supplied.

4" Tall bumper--The holes are drilled for a 5/8" bolt, not supplied.

From the left side: bolt holes are centered at: 4", 15", 26", 37", 48", 59", 70", 81", 92"

FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.

Trailer Safety Bumper 3" x 8', Choice "B"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper 4" x 8', Choice "B"

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

Trailer Safety Bumper-8ft / 96" long, with NO HOLES Drilled  NEW!

The bolt holes can be drilled as shown on the left, in a custom pattern.

DO IT YOURSELF!

Trailer Safety Bumper: Rubber, 8' long, with 3" height

Bumper comes with No Pre-drilled Holes. We have to SPECIAL ORDER it from the manufacturer (not something we have on the shelf ). Expect 4-6 weeks delivery time to the customer.

Molded of hard rubber, hollow in the middle, 96' in length & 3" in height. Height measurement is the flat back where it is fastened to the trailer. These bumpers are hollow, and can be cut with a saw. They can be drilled with a custom pattern of bolt holes to match the pattern on your existing trailer bumper (do it yourself). The holes are traditionally drilled through the front, but installed recessed on the inside.

 FOB: An extra charge in addition to flat-rate shipping charges  for shipping a LARGE, HEAVY OR LONG item by ground.

Rubber Trailer Safety Bumper 3" x 8', NO HOLES, Special Order

Product Name:
 
SKU:
FOB Shipping (US$):
Price (US$):

 

 We recommend that all parts and accessories be installed by a professional. If you choose to install them yourself, Trail Pals will not be responsible for any damage caused to yourself or your property.

 
HOME
  |  SHIPPING POLICY  |  RETURN POLICYFAX ORDER FORM  |  CONTACT

 
Assisted by Quail Oaks Financial, LLC Webdesigns
Copyright 2005-2013 Trail Pals & Horse Trailer Accessory Store All rights reserved.