|
|
 |
.
"Hitching & Hauling"
This is our
selection of accessories that are designed for
use between the
front of the trailer and the back of the towing
vehicle. Included below are Ball Mounts and Hitch
Balls.
Scroll
down for Hitch Pins/ Click here
Safety Chain Hardware
|
|
|
HitchSaver |
 |
Created
by a fellow trailer owner!
The
HitchSaver is a durable waterproof
vinyl cover designed to protect a trailer's
bumper-pull hitch assembly from peeling
paint and rust that results from storing it
outdoors. It comes in two sizes for an exact
fit. Features a zipper up the back and a
buckle underneath to keep it fastened firmly
in place. Heavy-duty and machine
washable!
Choice of
two
colors--charcoal or light gray.
Two sizes-Measure
from top of tongue to top of jack:
16" or less
= medium size
Taller
than 16" = tall size
HitchSaver Security Lock sold
separately below. |
|
HitchSaver
Med Gray |
|
|
|
HitchSaver
Tall Gray |
|
|
|
HitchSaver
Med Charcoal |
|
|
|
HitchSaver
Tall Charcoal |
|
|
|
HitchSaver Security
Lock |
|
|
|
|
Trailer Tongue Hitch Spotter |
 |
A
wonderful invention that fastens to your steel trailer tongue
with a heavy magnet base to assist you in hitching up your
bumper-pull trailer. It shows you exactly how your ball
and hitch are aligned, for a quick and easy hookup! Once
the 24"-48" telescoping aluminum neck and the
6" X16" mirror are adjusted to show the first
6" of your trailer tongue, simply detach the Hitch
Spotter and leave it at home, ready for the next
hook-up. The mirror has a lifetime replacement
warranty from the Manufacturer.
|
|
The
Hitch Spotter |
|
|
|
|
Gooseneck Ball Spotter |
 |
This is just too easy!
For hooking up a gooseneck trailer by yourself, just set
this tool on the passenger side of the pickup bed rail
and watch it with your side mirror as you back the truck
towards the hitch. No more jumping in and out of the
truck! Stays adjusted to the right angle. Clamps on, but
can be attached with screws. (not
included)
|
|
Gooseneck Ball Spotter |
|
|
|
."Ball
Mounts & Hitch Balls"
There is
no room for guessing when towing a trailer
loaded with animals!
These are are some basic towing tips:
The
vehicle's maximum towing capacity is determined
by the manufacturer. It usually can be found in
the owner's manual or sometimes on a sticker
near the inside of the front door, or in the
glove box. The hitch welded or bolted to the
underside of the truck should be Class V. A
Class IV can be used in some cases, but only
with weight distribution bars added. Gross
Trailer Weight (GTW) is the weight of the
trailer fully loaded (trailer weight, animals,
tack, hay, etc). The TW is the weight that the
tongue of the fully loaded trailer
exerts down on the ball & ball mount. The tongue
weight is usually 10%-15% of the gross trailer
weight. The GTW & TW must conform to the
vehicle's maximum towing capacity. We recommend
using only a solid (not hollow) ball mount when
hauling animals. The ball mount & ball weight
rating must match or exceed the hitch & trailer
in towing capacity. The pairing of ball & ball
mount will be rated together only as high as
it's weakest component.
Many
other
safety factors apply when towing, such as having
working electric brakes connected to a a
brake controller mounted in the cab of the
vehicle, a breakaway brake cable kit installed
(with a charged 12 volt battery), and an
electric light/brake cable running from the
trailer to a plug in the rear of the tow
vehicle. You'll need an added transmission oil
cooler for automatic transmissions, and properly
installed safety chains.
All of the items
mentioned above should be installed by a trailer
professional. The balls & ball mounts sold below
are meant only as replacement items or upgrades
to existing professionally installed trailer
towing systems.
__________________________________________________________
|
|
|
Multi-Ball Hitch Bar |
 |
A very handy tool if you
have to move multiple trailers with different size balls
around the farm or yard with a vehicle like a ATV, small
truck
or tractor, or are hauling a trailer with a low base. (It won't work if you need any
size of
drop.) Just
rotate and re-position the 5/8" hitch pin in the 2" receiver
tube.
Features a heavy-duty solid steel
shank with a black powder coat finish. Three welded steel 1 7/8", 2" and 2 5/16" balls.
The 1 7/8" ball is rated at 6K, and the other two balls
are rated at 10K. |
|
Multi-Ball Hitch Bar |
|
|
|
|
Rapid
Hitch--the last ball mount you'll ever buy!:
SALE!
FREE SHIPPING |
 |
This is the well-known
Rapid Hitch, made with solid super alloy aluminum, made by
Anderson. 10,000 lb. GTW/ 1,500 lb. TW.
SALE! Until the end of May, 2010, get FREE
SHIPPING on all Rapid Hitches! (Call
in your order, or if
the website charges you, we'll refund the
shipping right back).
Each features a 2" and
a 2 5/16" steel ball, rated
at 10,000 lbs. and comes
standard with a non-locking stainless steel pin (pictured).
To operate, just pull the pin, adjust up or
down & slide the pin back in. The ball
mounts can be reversed to fit upwards for
added rise positions.
Consider upgrading &
protecting your investment with a LOCKING stainless
steel 2-pin set, keyed alike
(one receiver pin and 1 matching pin) for the
Rapid Hitch.
We do not take returns
on these items, because they usually
come back scratched. Everyone deserves a
new, unused product when ordering a Rapid
Hitch.
*Order carefully---these
ball mounts are NOT RETURNABLE!
The most common mistake is ordering a ball
mount that will scrape the ground when
driving over bumps or up & down steep roads,
because the vehicle doesn't provide enough
clearance.
|
|
Rapid Hitch, 5 1/4" Drop/Rise, w/ 2 Chrome Steel
Balls |
|
|
|
Rapid Hitch, 5 1/4" Drop/Rise, w/ 2 Stainless
Steel Balls |
|
|
|
Rapid Hitch, 10" Drop/Rise, w/ 2 Chrome Steel
Balls |
|
|
|
Rapid Hitch, 10" Drop/Rise, w/ 2 Stainless Steel |
|
|
|
Rapid Hitch, Keyed Alike Locking 2 Pin Set/Class
III & IV |
|
|
|
Rapid Hitch, Keyed Alike Locking 2 Pin Set/Class
V |
|
|
|
|
Alumistinger Ball Mounts |
 
 
*All
of these Alumistingers by Andersen feature a
1" hole.
*To be safe, you
must
pair these Alumistingers with a 8,000 lb.
(or higher) rated ball.
|
These well-known ball mounts are solid
aluminum, and solid ball mounts (not the
hollow type) are what is recommended for
towing animals in trailers.
Available in a 2", 4", 6", 8", and 10"
drop or rise with a
continuous
shine that will last a lifetime.
These
ball mounts will never rust.
Fits
a standard 2" square receiver.
These are the lightest
and strongest ball mounts on the market,
made of aircraft
aluminum alloy which is 30% stronger than
steel.
Fully tested and
verified by an independent lab.
All 5 sizes of these
Alumistingers are rated exactly the same:
8000 GTW/ 800TW (Gross Trailer Weight/Tongue
Weight). Please read the information
found on your trailer to be sure this is the
setup you should have.
*For maximum
strength, you
must
pair these Alumistingers with a 8,000 lb.
(or higher) rated ball. You may use a 10K,
12K lb. or 14K rated ball,
but then the ball mount rating will stay at
8,000lbs., because the pair is only rated as
strong as the weakest component.
*Order carefully---these
ball mounts are NOT RETURNABLE!
The most common mistake is ordering a ball
mount that will scrape the ground when
driving over bumps or up & down steep roads,
because the vehicle doesn't provide enough
clearance. |
|
Alumistinger 2" Drop, 1" Hole |
|
|
|
Alumistinger 4" Drop, 1" Hole |
|
|
|
Alumistinger 6" Drop, 1" Hole |
|
|
|
Alumistinger 8" Drop, 1" Hole |
|
|
|
Alumistinger 10" Drop, 1" Hole |
|
|
|
|
Polished Aluminum
Ball Mounts |
By
Diversi-Tech |
A traditional looking ball
mount, in solid aluminum.
These polished aluminum ball
mounts are precision machined and have a
aircraft-strength billet aluminum body. They
are made in ONE PIECE, for strength,
with no welds or seams. Solid
ball mounts (not the hollow type) are what
is recommended for towing animals in
trailers.
Anti-Rattle feature:
2 small spring-loaded stainless steel balls,
which eliminate noise & cut down on wear &
tear for a better hitch life.
All 3 sizes of these ball
mounts are rated exactly the same: Class
V, 14,000 lb./ 2,000 lb. GTW/TW
*These ball mounts
should
be
paired with a 14,000 lb.
rated ball, for maximum strength. You may use a 10K
or 12K rated ball,
but then the ball mount rating drops, because the pair is only rated as
strong as the weakest component.
|
|
Aluminum Ball Mount, 2" Drop, 1" Hole |
|
|
|
Aluminum Ball Mount, 4" Drop, 1" Hole |
|
|
|
Aluminum Ball Mount, 6" Drop, 1" Hole |
|
|
|
|
Self-Locking
Polished Aluminium Ball Mounts |
 |
NEW! A self-locking ball mount!
Features o-ring sealed lock pin for maximum
strength, safety & corrosion resistance.
Solid
ball mounts (not the hollow type) are what
is recommended for towing
animals in trailers.
Order carefully--these ball mounts are
NOT RETURNABLE.
All six of these
locking ball mounts by Divirsi-Tech are
rated: Class V, 14,000 lb./2,000 lb. GTW/TW
*To be safe, you
must
pair these ball mounts with a 14,000 lb.
rated ball. You may use a 10K or 12K ball,
but then the ball mount rating drops, because the pair is
rated only as
strong as the weakest component.
|
|
Locking Aluminum Ball Mount, 2" Shank, 2"
Drop, 1" Rise, 1" Hole |
|
|
|
Locking Aluminum Ball Mount, 2" Shank, 2"
Drop, 1" Rise, 1 1/4" Hole |
|
|
|
Locking Aluminum Ball Mount, 2" Shank,
4" Drop, 3" Rise, 1" Hole |
|
|
|
Locking Aluminum Ball Mount, 2" Shank, 4"
Drop, 3" Rise,
1 1/4" Hole |
|
|
|
Locking Aluminum Ball Mount, 2"
Shank, 6" Drop, 5" Rise, 1" Hole |
|
|
|
Locking Aluminum Ball Mount, 2"
Shank, 6" Drop, 5" Rise, 1 1/4" Hole |
|
|
|
|
"Convert-A-Ball" Hitch Balls |
 |
Install
the Convert-A-Ball system on
bumper-pull or tag-along ball mounts.
Each comes with one heavy-duty
bolt-on 1" shank (for ball mounts with 1" holes) and
a choice of three possible sizes of
interchangeable
balls--- 1 7/8", 2", and 2- 5/16".
All of the steel chrome
plated and stainless steel balls sold
below are rated at 10,000. lbs.
It's easy to
change the balls--each has a self-handle that pops back into
the ball after screwing it onto the shank (the ball
cannot fall off and no tool is needed to
change it). The same
shank stays bolted solidly to the ball
mount at all times. What a great product!
Choose from chrome
plated or
stainless steel and 2-ball or 3-ball sets,
all rated at 10K.
|
|
Convert-A-Ball, 1" Shank, 3 Ball Set (1-7/8",
2" & 2 5/16"),Chrome |
|
|
|
Convert-A-Ball, 1" Shank, 3 Ball Set (1-7/8",
2" & 2 5/16"),Stainless Steel |
|
|
|
Convert-A-Ball, 1" Shank, 2 Ball Set (2" &
2-5/16"), Stainless Steel |
|
|
|
Convert-A-Ball, 1" Shank, 2 Ball Set (2" &
2-5/16"),Stainless Steel, XL Shank |
|
|
|
Convert-A-Ball, 1" Shank, 2 Ball Set (2" &
2-5/16"),Chrome |
|
|
|
Convert-A-Ball, 1" Shank, 2 Ball Set (2" &
2-5/16"),Chrome,
XL Shank |
|
|
|
|
Trailer Hitch
Balls |
 |
These are steel hitch balls with 1" or 1-1/4"
wide shanks, that match the same diameter holes
on ball mounts. They are
heat-treated & chrome plated---they look great &
will perform well. All rated
at
12,000
lbs.
Check the labels on your tow vehicle & on
your trailer for weight rating information.
Always use a solid ball mount when hauling
large animals. Choose a ball mount & ball
rated the same as your truck & trailer, or
higher. Remember, the pairing of ball
& ball mount is rated only as strong as the
weakest component. |
|
2" Ball, 1" Shank,
12K,Chrome |
|
|
|
2-5/16" Ball, 1" Shank,
12K,Chrome |
|
|
|
2-5/16" Ball, 1 1/4" Shank,
12K,Chrome |
|
|
|
|
Chrome
Receiver Cover-Lockable |
 |
This fits into your
2" receiver when the ball mount is removed. Can be
locked with your hitch pin lock or fastened on with a
plain hitch pin. Looks Sharp!
*pins not
included |
|
Chrome
Receiver Cover-Lockable |
|
|
|
|
5/8"
Diameter
Hitch Pin (standard) |
 |
Used to fasten the
ball mount into the receiver tube on the truck
hitch. A large keeper clip fits over the groove on the
end to secure it. Polished steel. *These
days most ball mounts are locked on, BUT
for emergencies, it comes in handy to
still have a standard hitch pin & clip in your
vehicle. You may need to trade out your coupler with another---OR
you will need it if the locking end falls off
of your locking
hitch pin.
|
|
5/8"
Diameter
Hitch Pin |
|
|
|
|
1/2" Diameter
Hitch Pin |
|
|
Used to fasten the
ball mount into the receiver tube on the truck
hitch. A large keeper clip fits over the groove on the
end to secure it. Polished Steel. |
|
1/2" Diameter
Hitch Pin |
|
|
|
|
Large Keeper Clip for Hitch Pin |
 |
This 3 1/4"
long hairpin keeper clip
fits over the groove on the end of the 5/8" or
1/2" hitch pin to
secure it. In other models, it may fit through
a small hole at the end of the hitch pin. It is
sometimes also used to secure
the sliding coupler latch handle so it won't slip off the ball when
connected. It is the largest of the keeper
clips. To attach
to trailer, see the lanyards sold on the
hitch pin page. |
|
Keeper Clip for Hitch Pin, large |
|
|
|
|
|
