|
|
 |
Trailer Coupler Locks
|
|
|
Trigger-Type Coupler
Lock w 3/4" Span |
|
 |
This device locks your
trigger-type coupler while it is attached to your truck,
in place of a coupler safety pin. Prevents removal of
the trailer from the ball mount. Remember to lock your
ball mount to your trailer with a locking hitch pin
also!
|
|
Trigger-Type Coupler
Lock w 3/4" Span |
|
|
|
|
THE
COLLAR Coupler Lock, in stainless steel |
 |
The Collar is
a anti-theft device for sliding-collar type
trailer hitches. It provides 24 hour
protection against trailer theft when the
trailer is attached to or detached from the towing
vehicle. It never gets lost, since it is always
kept on the trailer. A quality product, cast out
of stainless steel, it weighs nearly 1 1/2 lbs,
and will never rust.
The curved design resists physical damage , such
as hammering or sawing. The hole where the hinge
pin is inserted are welded shut and allow the
hinge pin to "float" in order to to
resist drilling. The Collar will work with an
assortment of different padlocks, allowing the
owner to key locks alike. Sold with a 70 MM
stainless steel round padlock below for $10.00
more. Multiple order will have the padlocks keyed alike. Designed to fit all BULLDOG bumper-pull
couplers, and many Kodiak & Butler
couplers.
THE COLLAR Coupler Lock:
choose with or without a 70 mm round padlock
|
|
THE
COLLAR Sliding-Collar Coupler Lock |
|
|
|
THE
COLLAR & Round Padlock |
|
|
|
|
|
|
Maximum Security
Coupler Lock |
|
 |
Fits all three common
coupler and ball sizes-1
7/8",
2", & 2 5/8".
Almost impossible to remove by thieves. The bottom piece
fits into the place where the ball goes, then the upper
bars adjust through the side holes to fit tightly onto
the top of the coupler. When it is on tight, just lock
with the key provided, and it stays put. It has two
lock
mechanisms inside it, with no additional padlock needed.
|
|
Maximum Security
Coupler Lock
|
|
|
|
|
UMAX 50
Coupler Lock |
 |
The UMAX 50 fits 1 7/8", 2" and 2
5/16" Couplers. It has a hardened 5/8"
Steel Shackle. It has a dual ratchet
locking systems. It has rugged tubular
keys with key hole covers & a
corrosion-resistant finish. |
|
Product Name Here |
|
|
|
|
UMAX 100
Coupler Lock |
 |
The UMAX 100 fits 1 7/8", 2" and 2
5/16" Couplers. It has a hardened 5/8"
St4eel Shackle. IT has a dual ratchet
locking systems. Very rugged tubular
keys with key hole covers. The main body is
covered with
ballistic grade nylon housing for corrosion
resistance.. |
|
Product Name Here |
|
|
|
|
Bulldog
Trailer Lock |
 |
Heavy cast aluminum lock fits all
Hammer blow 1 7/8", 2" or 2 5/16"
Bulldog-style trailer couplers, and similar styles with
slide collars. Lower portion has a ball that inserts
into the coupler. For
rugged use, and will not rust or wear out.
Shown with
RTP70 round padlock (sold separately below).
|
|
Bulldog
Trailer Lock |
|
|
|
|
Universal
Trailer Lock |
 |
Heavy-duty cast aluminum lock for larger trigger-type couplers. Fits 30
types of couplers including 8,000 lb. and 10,000 lb.
Atwood couplers. Lower portion has a ball that inserts
into the coupler.
Shown with RTP70 padlock (sold
separately below). |
|
Universal
Trailer Lock |
|
|
|
|
Gooseneck
Trailer Coupler Lock |
 |
Heavy-duty cast aluminum lock fits the on the bottom of most
gooseneck couplers, including Stallion, T.E.M.,
Superior, and Hammer blow. Has a 3/4" pin for a
secure fit. Shown with GNSL (stem bolt lock) and RTP70
(round padlock), each sold separately below. |
|
Gooseneck
Trailer Coupler Lock |
|
|
|
|
Gooseneck
Trailer Stem Bolt Lock |
 |
Prevents theft by
removal of the
adjustable stem bolts on your gooseneck coupler. Even
when the bottom is locked, thieves can steal your trailer
by removing the stem lock bolts, dropping the
gooseneck attachment and inserting another
coupler or king pin. *You
will need a padlock to lock this device, sold separately
on the padlock page. Sets are available... |
|
Gooseneck
Trailer Stem Bolt Lock |
|
|
|
|
|
