|
choose
from silver, white or black
recommended fastener choices:
 
3 machine screws & 3 jack nuts
OR
three #14 sheet metal screws
|
Keyed
Cam Latch System
Replaces
your old cam bar latch with a newer,
easier & more secure KEYED cam latch
system.
The Keyed
Cam Latch is a secure latch
and lock all in one system! The
exterior is made from die-cast aluminum
and internal working components are of
stainless steel. It is available in
three powder-coated finishes: White,
Black & Silver.
The cam bar slides down
into the beveled entry jaw and opens the
bar lock lever. Then then as it slides
down farther, the bar lock lever securely
closes and retains the bar. Super-safe for
your animals, it cannot open without
manually pulling the bar lock lever
forward. The top 2 mounting screws
are covered by the cam bar for a theft deterrent.
*Your
entire order of keyed cam latches units
will be keyed alike, unless specified
otherwise.
*The
bar lock lever will hold up to a 1 1/4" tall and
3/8" thick cam bar. The keyed cam latch may not
completely cover the old cam bar latch holes
in the door. Usually, one hole is left
showing at the top. This can be closed
by inserting a sheet metal screw screw
left over from the cam latch back into
the hole.
Three #14
flat head sheet metal screws will fasten each new keyed cam latch, but
we recommend that you attach the
keyed cam latches with a machine screw
and jack nut to create a better anchor.
Both are available below or on the
FASTENER page.
|
.JPG)
