Engager Break-Away Brake Kit

You will know at all times if your battery is charged, without having to remove it from the case!

For complete instruction manual, click below & enter product # 20100

http://www.hopkinstowingsolutions.com

Will activate trailer breaks immediately if the trailer separates from the tow vehicle. The built-in battery charger- charges battery while connected with the tow vehicle.  Built-in "Push to Test" LED battery meter will verify the battery charge as fully charged, re-charge, or charging. The side-mounted box can be mounted under the tongue of the trailer or in the tack area. 1 - 2 axle capacity, uses a 5 Amp hour battery. Instructions included.

Engager Break-Away Brake Kit --FLIP TOP STYLE

You will know at all times if your battery is charged, without having to remove it from the case!

For complete instruction manual, click below and enter product # 20400

http://www.hopkinstowingsolutions.com

Will activate trailer breaks immediately if the trailer separates from the tow vehicle. The built-in battery charger- charges battery while connected with the tow vehicle.  Built-in "Push to Test" LED battery meter will verify the battery charge as fully charged, re-charge, or charging. The side-mounted box can be mounted under the tongue of the trailer or in the tack area. 1 - 2 axle capacity, uses a 5 Amp hour battery. Instructions included.

Weld-On Mounting Bracket for Engager Battery Boxes

This bracket can be welded to the trailer & includes the studs & bolts so the Engager battery box can be mounted to it.

Complete Replacement Break-Away SWITCH

Replace the whole break-away switch. Includes the switch, pin and a 44"cable. Mount on tongue & wire in. We like this product because it has a nylon (weatherproof)  case and a metal tab that can be screwed or welded onto the trailer tongue. Works in conjunction with any breakaway system.

NEW! ZIP Replacement Break-Away SWITCH

Tired of  replacing your broken breakaway cable? Are you stabbing your fingers with the frayed end, or looping it over and around things to keep it out of the way? You need the new Fastway ZIP spiral coiled breakaway cable! This new trailer breakaway cable & switch is designed to keep your cable off the ground & out of harm's way. It is faster & easier to use than a standard cable. When it is connected, the high-strength coiled cable goes straight from the switch to the trailer & never drags. When it's disconnected, it retracts & coils next to the switch, out of the way. And the cable is RED, so you won't forget to hook it up.

Includes: Switch w/ pin, spiral cable & 3/8" OD snap link for attaching to the  trailer & instructions.

4' ZIP breakaway cable sold below.

Product Name:
SKU:
Price (US$):

Replacement 12-Volt Battery for Break-Away Systems

   NEW!  ZIP 4' Breakaway Cable ONLY  (replacement)

This cable is designed to replace the breakaway cable attached to your existing pin that is already in your breakaway switch. It is so easy and only takes seconds to install. Simply snip the existing breakaway cable from the pin & slip the ring at the end of the ZIP cable onto the loop on the pin.

This new trailer breakaway cable & switch is designed to keep your cable off the ground & out of harm's way. It is faster & easier to use than a standard cable. When it is connected, the high-strength coiled cable goes straight from the switch to the trailer, & never drags. When it's disconnected, it retracts & coils next to the switch, out of the way. And the cable is RED, so you won't forget to hook it up.

Product Name:
SKU:
Price (US$):

Replacement PIN & CABLE ONLY for Engager Break-Away Switch

Replacement  Pin & Cable ONLY for Tekonsha 2010 Break-Away Switch

Replacement Pin & Cable ONLY for 2010B Tekonsha Break-Away Switch

Replacement Pin & Cable ONLY for 1026 Tekonsha Break-Away Switch

Snap Link, 3/8" OD X 4" L

4" Long, Large Snap Link

 If you must fasten the break-away cable to the back of the tow vehicle with a snap with a smaller opening (3/8"), order the 5/16" Snap Link on the Butt Chain page.

This large size snap link is 3/8" in diameter, 4" in length. Zinc-plated polished steel. This snap is what we recommend to securely fasten the Break-Away Switch Cable to the tow vehicle, because it has a large (1/2") opening & it's easier to find a place to fasten it to.

Trail Pals Tip: Please take a good look at to the rear of your tow vehicle. After the safety chains are crossed & clipped to the tow vehicle, attach the break-away switch SEPARATELY, and clear from the chains. The switch is designed to pull out if the trailer looses it's connection with the tow vehicle, and then activate the brakes on the trailer (it stops the trailer so that it cannot move independently with the animals in it).  Make sure it can't touch the ground, or it may fray. Attach it to the tow vehicle where there is a place to snap it into, or in the same hole as the safety chain clip, but clipped separately. The cable must be capable of pulling the pin easily & completely out of the switch should the tow vehicle become detached from the trailer.